ojs2 has produced an error Message: USER NOTICE: Deprecated function. In file: /var/www/widyariset/classes/article/Article.inc.php At line: 76 Stacktrace: Server info: OS: Linux PHP Version: 5.6.33-1+ubuntu16.04.1+deb.sury.org+1 Apache Version: Apache/2.4.18 (Ubuntu) DB Driver: mysql DB server version: 5.7.26-0ubuntu0.16.04.1
AC POWER CALIBRATION ON POWER QUALITY ANALYZER USING A MULTIPRODUCT CALIBRATOR | Amalia | Widyariset

AC POWER CALIBRATION ON POWER QUALITY ANALYZER USING A MULTIPRODUCT CALIBRATOR

Hayati Amalia, Agah Faisal

Abstract


AC power calibration on power quality analyzer by using indirect method has been developed in Research Center for Metrology, Indonesian Institute of Science (LIPI). The measurement was performed by applying input voltage and input current from a standard multiproduct calibrator. Before being transferred to a power quality analyzer, the input current is passed first to the current coil to adapt the measuring range of the coil clamp of the power quality analyzer. Data collection and evaluation to determine the correction and uncertainty were carried out separately and alternately per phase. The analysis to evaluate the measurement correction and uncertainty was developed by considering the parameters that form the AC power, such as voltage, current, and phase angle. Based on the result of the calibration data analysis, it was obtained 5% of correction by the greatest measurement uncertainty of 1.92% at confidence level of 95% and coverage factor k=2.

Keywords


Power quality analyzer; Current coil; AC power; Calibration; Uncertainty

Full Text:

References


Bucci, Giovanni, Carmine Landi, and Caludion De Capua. 1999. “Power Measurement.” Wiley Encyclopedia of Electrical and Electronics Engineering 33 (9): 964–74.

Carranza, R, S Campos, A Castruita, T Nelson, A Ribeiro, E So, L Di Lillo, et al. n.d. “Final Report Key Comparison of 50/60 Hz Power - SIM.EM-K5.” Mexico.

Cepisca, C., G. Seritan, S. Grigorescu, and F. Argatu. 2013. “Aspects of Metrological Calibration of Power Quality Analyzers.” Advanced Topics in Electrical Engineering (ATEE), 2013 8th International Symposium on IEEE, 1–4. doi:10.1109/ATEE.2013.6563507.

Faisal, Agah. 2015. “Penetapan Sistem Acuan Daya AC Untuk Laboratorium Standar Nasional Berdasarkan Standar Watt Coverter.” Jurnal Standardisasi 17 (1): 11–20.

Faisal, Agah, Windi Kurnia Perangin-angin, and M. Syahadi. 2012. “Kalibrasi Standard Daya Listrik Dengan Metode Pengukuran Langsung Menggunakan Standard Watt Converter.” Pertemuan Dan Presentasi Ilmiah Kalibrasi, Instrumentasi, Dan Metrologi (PPI-KIM) Ke-38, 512–22.

Fluke Corporation. 2002. “Instruction Sheet, Model 5500A / COIL, 50-Turn Current Coil.” PN 600616. Rev. 6, 12/02. United State of America.

———. 2003. Operators Manual 5520A Multi-Product Calibrator. Rev. 6, 1/03. United State of America.

———. 2006. Getting Started, Fluke 434 / 435 Three Phase Power Quality Analyzer. Netherlands.

Jaiswal, Shiv Kumar, V N Ojha, and Ajeet Singh. 2005. “Estimation of Uncertainty in Measurement in Precision Calibration of DC High Current Source up to 100 A.” Journal of Scientific and Industrial Research 64 (9): 666–73.

JCGM. 2008. JCGM 100 : 2008, Evaluation of Measurement Data: Guide to the Expression of Uncertainty in Measurement. 1st ed. JCGM. doi:10.1373/clinchem.2003.030528.

KESDM. 2007. Peraturan Menteri Energi Dan Sumber Daya Mineral Republik Indonesia Tentang Aturan Jaringan Sistem Tenaga Listrik Jawa-Madura-Bali.

Munir, Miftahul, and Agah Faisal. 2014. “Penerapan Metode Komparasi Pada Kalibrasi Standar-Antara Untuk Besaran Daya AC.” Pertemuan Dan Presentasi Ilmiah Kalibrasi, Instrumentasi, Dan Metrologi (PPI-KIM) Ke-40, 319–30.

National Measurement Institute of Australia. 2012. “Measurement Report on Energi Meter ZERA Model RMM 3001.” Australia.

P2M-LIPI. 2012. “Work Instruction of Calibration Method of Single Phase AC Power Meter.” 1st Edition. Tangerang Selatan.

———. 2015. “Sertifikat Kalibrasi Multifunction Calibrator Fluke 5520A.” Tangerang Selatan.

Syahadi, Mohamad, R. Hadi Sardjono, and Lukluk Khairiyati. 2012. “Verifikasi Sistem Pengukuran Tegangan AC Berbasis METCAL 7.20 Berketelitian Mencapai 2 Ppm.” Jurnal Standardisasi 14 (1): 22–33. doi:10.1017/CBO9781107415324.004.




DOI: http://dx.doi.org/10.14203/widyariset.3.1.2017.67-80

Refbacks

  • There are currently no refbacks.




Copyright (c) 2017 Widyariset

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Indexed by :